Desoldering, Soldering & Rework Systems for Through-Hole and
Surface Mount PCB Repair
from PACE Incorporated

Represented by GSA Service Company

 


 

In the early 60's, PACE Incorporated revolutionized the electronics industry by creating the first self-contained continuous vacuum desoldering system. Today, PACE is still the leading manufacturer of rework and repair systems for advanced electronics, and additionally produces Solder Fume Extraction systems. Utilized at all major Army, Navy, Air Force, Marine Corps, Coast Guard and US Federal Government maintenance Depots, you'll also find PACE equipment in shipboard repair shops, mobile maintenance vans and thousands of intermediate maintenance facilities worldwide. PACE systems are legendary for their reliability, long-life and supportability. And most equipment, spares and replacement parts are readily available through National Stock Numbers (NSN's) or via GSA Schedule/Contract. Proudly made in the USA.

Quick Links to PACE Systems, Handpieces, Accessories  & Other Info on this Page

MT-100 MiniTweez Tip Cartridges

MBT 250 SMT/Thru-Hole Systems

MBT-350 Multi-Channel Rework Systems

MBT-301 Desoldering and Solder System

IntelliHeat and SensaTemp Handpieces

TJ-85 ThermoJet Pencil Tips & Spares

Upgrade to the CLOG-FREE SX-90

Download Flyers/Brochures/Data Sheets

NEW  PACE MBT 350 Multi-Channel Rework System

For Soldering, Desoldering and Repair of Through-Hole and Surface Mount PCB's

PACE's MBT 350 is a self contained, 3 channel station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The MBT 350 features the power of SensaTemp and IntelliHeat technology in one complete unit.

The unit features three individually powered and controlled handpiece channels, providing the capability to run 3 different IntelliHeat handpieces simultaneously, and at different temperatures. Try that with a Metcal/OK International "SmartHeat" system! A new pressure/vacuum control and No-Clog SX-90 Desoldering Handpiece delivers precise solder extraction. The TD-100 handpiece benefits from PACE's patented tip heater cartridge technology and features precision control with responsive thermal recovery. The easy to read LCD control panel is uncomplicated with added features such as temperature set back and password protection.

The MBT 350 is compact/rugged enough for field use, yet capable of handling the highest depot level repairs. That's why the MBT 350 was designated the primary electronics repair system in the USMC field deployable TK-8641 Portable Micro Miniature Solder Tool Kit NSN 5180-01-541-6262. In addition, the MBT 350 was recently selected as the main circuit card repair station in Tobyhanna Army Depot's DMOF ("Depot Maintenance of the Future") Program. Over 100 MBT350 Systems have been purchased at Tobyhanna over the past year!

Primary Features:

  • Includes new No-Clog SX-90 Solder Extractor
  • Powers 3 separate handpieces simultaneously, at different temperatures
  • Digital LCD Screen displays the temperature of all 3 handpiece channels, simultaneously
  • IntelliHeat manages both SensaTemp and Tip Heater Cartridge heating technologies invisibly
  • Auto-Off and Temperature Setback preserves tip life
  • Tip Temperature Offset for high mass tips
  • Password Protection from unauthorized changes
  • User definable Temperature Operating Range
  • Self-Contained, no shop air required, just plug it in!
  • Dual Purpose Vacuum/Pressure Pump includes patented Snap-Vac technology & high resolution pressure control
  • Includes 3 New Redesigned Tip and Tool Stands with Low Abrasive Dry Wipe Capability
  • Can connect up to 2 Instant-Setback Cubbies (optional)
  • Available via National Stock Number (NSN) or GSA Schedule/Contract
  • Proudly made in the USA


MBT 350 can power 3 separate handpieces simultaneously, at different
temperatures, and features a crystal clear Digital LCD Screen which
displays the temperatures of all 3 handpiece channels, in real time!

MBT 350/MBT 301 Compatible IntelliHeat Handpieces (click on each  product image for more info)


SX-90 Solder Extractor Desoldering Handpiece

TD-100 Tip Heater
Cartridge Soldering Iron

MT-100 MiniTweez
Surface Mount Tweezer

PS-90 Universal
Soldering Iron

TJ-85 ThermoJet Hot-Air/ Convective Soldering Tool

TT-65 ThermoTweez Surface Mount Tweezer

Buy a Complete MBT350 System or Mix & Match Power Supply and Accessory Handpiece Kits!

 

Description
PACE PN
NSN
MBT 350 System with TD-100, SX-90 and MT-100 Handpieces
8007-0454
No NSN
MBT 350 System with PS-90, SX-90 and MT-100 Handpieces
8007-0551
No NSN
MBT 350 System with PS-90, SX-90 and TT-65 Handpieces
8007-0553
No NSN
Description
PACE PN
NSN
MBT 350 Power Supply Only
8007-0452
6130-01-551-8266
SX 90 Solder Extractor Kit
6993-0266-P1
3439-01-546-6572
TD-100 ThermoDrive Soldering Iron Kit
6993-0263-P1
3439-01-546-6573
PS-90 Universal Soldering Iron Kit
6993-0267-P1
3439-01-578-7713
MT-100 MiniTweez Kit
6993-0264-P1
3439-01-565-6663
TT-65 ThermoTweez Kit
6993-0268-P1
No NSN
TP-100 ThermoPik Kit
6993-0280-P1
No NSN
TJ-70 ThermoJet (Handpiece only)
7023-0003-P1
No NSN
TJ-85 ThermoJet (Slim) Kit
6993-0270-P1
3439-01-589-7844

Click HERE for extensive National Stock Number listing of PACE Systems, Tips & Spares

NEW  PACE MBT 301 Dual Channel Desoldering & Soldering System

Easy to use,  Cost Effective and Expandable - NSN 3439-01-565-6653

Primary Features:

  • Includes new No-Clog SX-90 Solder Extractor
  • Powers 2 separate handpieces simultaneously, at different temperatures
  • Digital LCD Screen displays the temperature of all handpiece channels, simultaneously
  • IntelliHeat manages both SensaTemp and Tip Heater Cartridge heating technologies invisibly
  • Auto-Off and Temperature Setback preserves tip life
  • Tip Temperature Offset for high mass tips
  • Password Protection from unauthorized changes
  • User definable Temperature Operating Range
  • Self-Contained, no shop air required, just plug it in!
  • Dual Purpose Vacuum/Pressure Pump
  • Includes 2 new redesigned Tip and Tool Stands with Low Abrasive Dry Wipe Capability
  • Can connect one Instant-Setback Cubby (optional)
  • Available via National Stock Number (NSN) or GSA Schedule/Contract
  • Proudly made in the USA

With all the features of the MBT 350 above, PACE's dual channel MBT 301 is a cost effective, high performance system that can power up to two IntelliHeat Handpieces simultaneously. The system comes with the TD-100 Soldering Iron and No Clog SX-90 Solder Extractor Desoldering Handpiece, and is also upgradeable by adding extra IntelliHeat handpieces.


 Instant Setback Cubby (optional): Cubby powers down the TD-100's
temperature to below solder melt if it's in cubby for more than 45 seconds! Significantly extends tip-life and protects tips from damage/oxidation.
 
Description
PACE PN
NSN
MBT301 with TD-100 (includes SX-90 and TD-100 Handpieces)
8007-0478
NSN 3439-01-565-6653
NEW  MBT301 with PS-90 (includes SX-90 and PS-90 Handpieces)
8007-0549
No NSN

Click HERE for extensive National Stock Number listing of PACE Systems, Tips & Spares

PACE MBT 250 Series of SensaTemp Repair Systems

Most popular PACE system ever . . . In use on thousands  of Military/Government Repair Benches

The MBT 250 is simply the most popular PACE series ever produced, for good reason. First introduced in 1990, tens of thousands of units have been manufactured, many of which are still in use after 19 years! Renowned for their reliability, sustainability and longevity, PACE continues to support the MBT 250 Series with upgrades and enhancements. That's why MBT 250's are utilized at all major Army, Navy, Air Force, Marine Corps Depots, as well as thousands of intermediate level repair shops worldwide.


The MBT 250 is a central component of the Navy's Portable
2M (Miniature/Microminiature) Electronic Repair Kit.

The MBT 250 is available as an SD (Solder-Desolder) kit packaged with PS-90 Soldering Iron & SX-90 Sodr-X-Tractor Desoldering Handpiece, an SDT (Solder-Desolder-Tweez) kit with the PS-90 Soldering Iron, SX-90 Sodr-X-Tractor, and TT-65 ThermoTweez or as an SDTP (Solder-Desolder-Tweez-Pik) kit with the PS-90 Soldering Iron, SX-90 Sodr-X-Tractor, TT-65 ThermoTweez and TP-65 ThermoPik. Don't be fooled by 2 channel cheap imitations that "A.P.E." the MBT 250, specify the real PACE article!

Description
PACE PN
NSN
MBT 250-SDTP (includes SX-90, PS-90, TT-65 & TP-65 Handpieces)
8007-0206
NSN 3439-01-374-9173
see note below
MBT 250-SD (includes SX-90 and PS-90 handpieces)
8007-0203
NSN 3439-01-377-7760
MBT 250 Power Supply only
(no accessories)
8007-0349
NSN 3439-01-509-1378
NEW MBT 250-SDT (includes SX-90, PS-90 and TT-65 Handpieces)
8007-0547
NO NSN

IMPORTANT NOTE ABOUT TOP NSN:
It is unlikely you will receive a genuine PACE MBT 250 SDTP (PACE pn 8007-0206, NSN 3439-01-374-9173) System through a FEDLOG NSN, unless you sole-source justify.

Primary Features:

  • Includes new No-Clog SX-90 Solder Extractor
  • System, handpieces, tips, accessories and spare parts extensively supported by National Stock Numbers (NSN's) and also available via GSA Schedule/Contract
  • Proven system reliability, longevity, durability and sustainability
  • Digital Readout displays the selected channel's set and actual temperature
  • Powers 3 separate handpieces simultaneously, at different temperatures
  • SensaTemp Temperature Management System continuously monitors/responds to thermal load
  • Auto-Off and Temperature Setback preserves tip life
  • Tip Temperature Offset for high mass tips
  • Password Protection prevents unauthorized changes
  • User definable Temperature Operating Range
  • Power Supply is Self-Contained, no shop air required ... just plug it in!
  • Includes 4 new redesigned Tip and Tool Stands with Low Abrasive Dry Wipe Capability
  • Proudly made in the USA
     


Model MBT 250 SD (above) comes with the SX-90 and PS-90 handpieces
along with newly redesigned Tip & Tool Stands; additional handpieces
 and accessories can be added to expand its capabilities


MBT 250 Series features the new NO-CLOG SX-90
Solder Extractor Desoldering Handpiece
. Find out how to upgrade
your old SX-70 or SX-80 by clicking the above image.

Click HERE for extensive National Stock Number listing of PACE Systems, Tips & Spares

PRC 2000-2M Miniature/Microminiature Electronic Repair System

Used by Navy/Air Force/USMC/Coast Guard 2M Miniature/Microminiature Electronics Repair Program

System Capabilities:

  • ESD-safe repair of any electronic module, PCB or PWB including multilayer and flexible printed circuits
  • Easy and safe removal of surface mount/thru-hole components from circuit card assemblies
  • High reliability soldering via conductive, convective, resistance and lap reflow soldering techniques
  • Clog-free desoldering using continuous vacuum Solder Extraction  - shop air not required
  • Conformal coating removal, including epoxy, urethane, silicone & acrylic ... even parylene coating
  • Precision drilling, grinding, abrading, routing, brushing and cutting, for conformal coating removal/pcb repair
  • Drilling Test Probe/Brake Probe capability for multilayer pc board excavation
  • Substrate repair, including burns and delamination
  • Damage-free thermal wire stripping for removal of all types of insulation, including Teflon
  • Self-contained solder paste and flux dispensing - no shop air needed
  • Built-in vacuum for vacuum/component handling wand
     

Like PACE's MBT 250, the legendary PRC 2000-2M NSN 3439-01-415-4165 is a venerable workhorse that has been available since the early 90's. System quality, reliability, longevity, durability and sustainability have been proven through thousands of days of military operating hours. In fact, the PRC 2000 is fielded at every major Armed Forces Depot and is a central component of the Navy's 2M Miniature/Microminiature Repair Program. The 2M Program provides the tools and techniques required for certified Navy, Marine Corps, Air Force and Coast Guard electronic repair technicians to perform highly reliable, high quality repairs on complex circuit card assemblies. System, handpieces, tips, accessories and spare parts are extensively supported by National Stock Numbers (NSN's) and also available via GSA Federal  Supply Schedule/Contract.


Air Force AFREP 2M Technician
 using PRC 2000

Army Depot Electronics Mechanic repairs missile with PRC 2000

PRC 2000 mounted to top of
Marine Corps bench

Navy 2M (Miniature/ Microminature) Repair Technician uses PRC 2000-2M

PRC 2000 System/Handpieces Part Numbers/NSN's - click on each image for more info

Product Image
Description/Model
PACE PN
National Stock Number

PRC 2000 Standard System

SMT version of PRC 2000 series with a selection of handpieces & accessories allowing repair of both surface mount and/or through-hole technology on printed circuit assemblies/printed wiring boards
 
8007-0132
NSN 3439-01-362-7399

PRC 2000-TH System

Through-Hole version of PRC 2000 series with a selection of handpieces & accessories designed specifically for through-hole repairs on printed circuit assemblies/printed wiring boards
 
8007-0138
NSN 3439-01-395-4046

PRC 2000-2M System
2M (Miniature/Microminiature) Electronic Repair configuration includes PPS-400 Power Source and stand alone ST-400 Pre-Heater with a complete and full capability selection of handpieces, accessories, functional aids, spare parts and consumables.
 
8007-0161
NSN 3439-01-415-4165


PRC 2000 Power Source (PPS-400)
 
Power supply for PRC 2000 series with all electrical connections, motor pumps, temperature control channels/outlets, pulse-heat receptacles, auxiliary outlets and software features for all configurations of PRC 2000 series.
 
7008-0187
NSN 6130-01-407-1338

PRC 2000 Handpieces and Accessories

No Clog SX-100 SensaTemp
Solder Extractor
Desoldering Handpiece
6010-0106-P1
NSN 3439-01-476-0901
PS-90 SensaTemp Soldering Iron
6010-0131-P1
NSN 3439-01-551-8241
TT-65 SensaTemp ThermoTweez
Surface Mount Removal Tweezer
7025-0001-P1
NSN 3439-01-381-6323
TP-65 SensaTemp ThermoPik
Flat Pack Removal Handpiece
7024-0001-P1
NSN 3439-01-380-8913
TJ-70 SensaTemp ThermoJet
Hot Air/Convective Handpiece
7023-0002-P1
NSN 3439-01-399-4906
MC-65 MicroChine
Miniature Machining Rotary Tool
7026-0001-P1
NSN 3439-01-383-1037
PV-65 Pik-Vac Vacuum Wand
7027-0001-P1
NSN 4940-01-396-1874
TW-15 ResisTweez Pulse-Heat
Resistance Soldering Tweezer
7009-0005-P1
NSN 3439-00-155-4597
TS-15 StripTweez Pulse-Heat
Thermal Wire Stripper
7012-0002-P1
NSN 5130-01-247-4751
CT-15 ConducTweez Pulse-Heat
Conductive Soldering Tweezer
7020-0001-P1
NSN 3439-00-041-1985
LF-15 LapFlo/ThermoPart
Pulse-Heat Handpiece
7013-0004-02-P1
NSN 3439-01-354-3448

ST 400 Analog Radiant Pre-Heater
8007-0435
NSN 4520-01-575-4044

Click HERE for extensive National Stock Number listing of PACE Systems, Tips & Spares

ST 400 Analog Radiant/IR Pre-Heater
Self-Contained Infra-Red  Preheater pn 8007-0435 NSN 3439-01-546-6573

ST-400 is an analog, closed loop, temperature controlled radiant (infra red) 400 Watt preheater. Preheater is ideal for repair of heavy multilayer PCBs and for high thermal mass applications, including circuit card assemblies with heavy ground planes or aluminum heat sinks. Featuring medium wave length IR heaters, the ST 400 delivers the most penetrating and even heating available. The 140mm x 140mm (5.5" x 5.5") heating area allows for the use of significantly lower and safer temperatures when conductive or convective tools are used for component installation or removal. The angled front panel features a green Temperature Indicator LED and an easy to read analog control dial with C (Celsius) and F (Fahrenheit) temperature scales. The ST 400 was designed for use with either the ST 525/ST 550 PCB holders and is a perfect compliment to PACE convective systems (the ST 300, ST 325, or ST 350).

Heating Area: 5.5" x 5.5"; Power Requirements: 115 VAC, 50/60 Hz 425 Watts max; Dimensions: 4.1" H x 7" W x 12.5" D; Temperature Range: 100-400°F   

NEW  PACE SX-90 Clog-Free  Solder Extractor Desoldering Handpiece

Upgraded Heater/Tip Redesign Practically Eliminates Clogging!

PACE revolutionized the electronics industry in the 60's by creating the first self-contained continuous vacuum desoldering system. Now PACE, undisputed leader in Solder Extraction technology, has taken the best desoldering handpiece on the planet & made it better!

Clog-Free Desoldering


1st circle shows extra mass added to SX-90 tips to allow extra heat to travel
down end of stainless steel solder transfer tube, while stainless steel tube itself has also been widened and flared (2nd circle) on the end to eliminate solder clogging


Replacing the venerable SX-80, the new SX-90 Solder Extractor has been improved so that is does not clog! The modular heater has been re-engineered to transfer heat better through the length of new SX-90 Tips. The new SX-90 Tips (see above) will not clog because the isolated hot solder path is designed to stay well above solder melt temperature, preventing even Lead-Free solder from solidifying.

 

Disposable Sodr/Flux Trap or Glass Chamber



 

The SX-90 can be used with a disposable Sodr/Flux-Trap paper solder collection chamber or optional re-cleanable Glass Chamber. When the filter is full, just pull out the chamber, pop out the old filter and replace with a new one - all within 15 seconds!

Description
PACE PN
NSN
No Clog SX-90 Solder Extractor
Desoldering Handpiece, SensaTemp
6016-0106-P1
NSN 3439-01-476-0901
No Clog SX-90 Solder Extractor
Desoldering Handpiece, IntelliHeat
6016-0149-P1
NSN 3439-01-551-8233
No Clog SX-90 Solder Extractor
Desoldering Kit, IntelliHeat (includes SX-90, Tip & Tool Stand, and accessories)
6993-0266-P1
NSN 3439-01-546-6572

Click HERE for SX-90 National Stock Number List for Tips, Spare Parts & Consumables

 

Modular Heater Design




The SX-90 has a modular heater design. Remove 2 screws, unplug the heater. Plug in the replacement heater and replace the two screws. Two minutes tops! No Wires, no calibration, no hassle.
 

Support for SX-70 Solder Extractor Desoldering Handpiece 6010-0077-P1 NSN 3439-01-551-8233


PACE continues to support this venerable old workhorse desoldering handpiece, which can only be used on SensaTemp power sources. SX-70 uses Endura Desoldering Tips only - newer No-Clog SX-90 Tips are not compatible.

Find SX-70 spare parts, tips and consumables by clicking HERE.
 

 

Download SX-70 Replacement Parts pdf

NSN's  for PACE SX-90 No-Clog Desoldering Tips
Compatible with SX-90 Handpieces/Heaters Only , will NOT  fit in SX-70 or SX-80 Handpieces

Product Image

Description/Model PACE PN National Stock Number

SX-90 Thermo-Drive Desoldering Tip
.030"ID X .080"OD, package of 5

SX-90 Thermo-Drive Desoldering Tip
.040"ID X .090"OD, package of 5

SX-90 Thermo-Drive Desoldering Tip
.060"ID X .120"OD, package of 5

SX-90 Thermo-Drive Desoldering Tip
.090" ID X .200"OD, package of 5

SX-90 Thermo-Drive Desoldering Tip
.160" ID X .200"OD, package of 5

1121-0930-P5


1121-0931-P5


1121-0932-P5


1121-0933-P5


1121-0951-P5
 
NSN 3439-01-571-1415
 

NSN 3439-01-564-4999
 

NSN 3439-01-571-1420


NSN 3439-01-589-6945
 

No NSN
SX-90 Flo-D-Sodr Tips
.060"ID X .188"OD, package of 5
1121-0945-P5 NSN 3439-01-571-1436
SX-90 Precision Flo-D-Sodr Tips
020"ID X .070"OD, package of 5

SX-90 Precision Flo-D-Sodr Tips
.030"ID X .080"OD, package of 5

SX-90 Precision Flo-D-Sodr Tips
.040"ID X .090"OD, package of 5

1121-0946-P5
 

1121-0947-P5


1121-0948-P5
 
NSN 3439-01-571-1446
 

No NSN
 

NSN 3439-01-571-1449
SX-90 Thermo-Drive FlatheadTip
.030" ID X .090"OD, package of 5
1121-0934-P5 No NSN
SX-90 Thermo-Drive Extended Reach
.030" ID X .090"OD, package of 5

SX-90 Thermo-Drive Extended Reach
.040" ID X .100"OD, package of 5

SX-90 Thermo-Drive Extended Reach
.060" ID X .120"OD, package of 5

1121-0935-P5
 

1121-0936-P5
 

1121-0937-P5
 
No NSN


No NSN


No NSN
SX-90 ThermoMax Desoldering Tip
.030"ID X .075"OD, package of 5

SX-90 ThermoMax Desoldering Tip
.040"ID X .085"OD, package of 5

SX-90 ThermoMax Desoldering Tip
.060"ID X .106"OD, package of 5

1121-0938-P5


1121-0939-P5
 

1121-0940-P5
 
No NSN
 

NSN 3439-01-589-7510


No NSN
SX-90 Precision Desoldering Tips
.020"ID X .070"OD, package of 5

SX-90 Precision Desoldering Tips
.030"ID X .080"OD, package of 5

SX-90 Precision Desoldering Tips
.040"ID X .090"OD, package of 5

SX-90 Precision Desoldering Tips
.060"ID X .110"OD, package of 5

SX-90 Precision Desoldering Tips
.025"ID X .055"OD, package of 5

SX-90 Precision Desoldering Tips
.025"ID X .045"OD, package of 5

1121-0941-P5
 

1121-0942-P5
 

1121-0943-P5
 

1121-0944-P5
 

1121-0949-P5
 

1121-0950-P5
 

NSN 3439-01-589-6970
 

NSN 3439-01-589-6919


NSN 3439-01-589-6561
 

NSN 3439-01-589-6984
 

No NSN
 

No NSN

Click HERE for extensive SX-90 NSN List for Tips, Spare Parts and Consumables

TD-100 Thermo-Drive Tip-Heater Cartridge Soldering Iron
IntelliHeat Control,  pn 6993-0263-P1, NSN 3439-01-546-6573

Crafted by a team of surgical instrument engineers to eliminate fatigue  and improve control, the PACE TD-100 is simply the most ergonomic, powerful and easy to use soldering iron on the market today! The handpiece uses a patented Tip-Heater Cartridge which can be changed in seconds without tools, and most tips heat up within 10 seconds flat! Performance/responsiveness is exceptional, perfect for the most demanding Lead-Free or multilayer soldering. Yet it can also handle the most delicate flexible printed circuits. Over 100 soldering tip geometries are available as well as over 30 surface mount removal tips. For use with IntelliHeat Systems only (including MBT 350, MBT 301, ST 50, etc).

For current National Stock Number listing of TD-100 spare parts, tips and consumables, click HERE.
 

   

Product Image

Description/Model PACE PN National Stock Number

Kit, TD-100 IntelliHeat Tip-Heater Cartridge Soldering Iron, includes
TD-100 Handpiece, Tip & Tool Stand; Compatible with PACE MBT 301, MBT 350, ST 30, ST 50, ST 65, ST 75, ST 100 and other IntelliHeat compatible systems
 
6993-0263-P1 NSN 3439-01-546-6573
1/64" Conical Sharp,
Tip-Heater Cartridge Soldering Tip
1124-0002-P1 NSN 3439-01-573-0952
1/64" Conical Sharp, Bent 30 Degrees,
Tip-Heater Cartridge Soldering Tip
1124-0003-P1 NSN 3439-01-573-2544
13/64" Conical Sharp Extended,
Tip-Heater Cartridge Soldering Tip
1124-0005-P1 NSN 3439-01-551-8216
13/64" Extra Large Chisel,
Tip-Heater Cartridge Soldering Tip
1124-0010-P1 NSN 3439-01-589-6013
1/64" 60 Degree Bevel,
Tip-Heater Cartridge Soldering Tip
1124-0011-P1 NSN 3439-01-589-6064
1/32" Chisel, 30  Degree,
Tip-Heater Cartridge Soldering Tip
1124-0012-P1 NSN 3439-01-573-0935
5/64" 60 Degree Chisel,
Tip-Heater Cartridge Soldering Tip
1124-0014-P1 NSN 3439-01-589-7996
3/64" Chisel Bent 30 Degrees,
Tip-Heater Cartridge Soldering Tip
1124-0016-P1 NSN 3439-01-589-7395
1/16" 60 Degree Chisel,
Tip-Heater Cartridge Soldering Tip
1124-0017-P1 NSN 3439-01-589-6601
1/32" Conical Sharp Extended,
Tip-Heater Cartridge Soldering Tip
1124-0018-P1 NSN 3439-01-589-7429
1/16" 30 Degree Chisel,
Tip-Heater Cartridge Soldering Tip
1124-0019-P1 NSN 3439-01-551-8223
1/8" 90 Degree Chisel,
Tip-Heater Cartridge Soldering Tip
1124-0020-P1 NSN 3439-01-551-8245
3/128" Conical Sharp Bent 30 Degrees,
Tip-Heater Cartridge Soldering Tip
1124-0021-P1 NSN 3439-01-589-6021
1/16" Conical Sharp,
Tip-Heater Cartridge Soldering Tip
1124-0022-P1 NSN 3439-01-589-7295
1/16" 30 Degree Bevel,
Tip-Heater Cartridge Soldering Tip
1124-0024-P1 NSN 3439-01-589-7211
1/16" Chisel Bent 30 Degrees,
Tip-Heater Cartridge Soldering Tip
1124-0026-P1 NSN 3439-01-589-7361
MiniWave SMT Installation,
Tip-Heater Cartridge Soldering Tip
1124-0032-P1 NSN 3439-01-589-6042
Angled MiniWave SMT Installation,
Tip-Heater Cartridge Soldering Tip
1124-0035-P1 NSN 3439-01-551-8265
.425" Blade
Tip-Heater Cartridge Soldering Tip
1124-0501-P1 NSN 3439-01-589-5821
Download TD-100 Tip/Spare Parts Info   Download Diamond Tip Cartridge Flyer
PACE IntelliHeat & SensaTemp Compatible Handpieces
MT-100 MiniTweez High Capacity Micro Tweezer, IntelliHeat Control NSN 3439-01-565-6663

The MT-100 is the only high capacity, micro thermal tweezer on the market today which features soft comfort grips, the smallest stroke available, and a tweezing action that mimics the natural motion of the human hand to eliminate hand fatigue. Like the TD-100, the MT-100 MiniTweez uses patented Tip-Heater Cartridges which can be changed in seconds without tools, and most tips heat up within 10 seconds flat! With 10 styles of component removal tips available, the MT-100 is one of the most versatile surface mount component removal tweezers and our tips cost less than half of our competitors! For use with IntelliHeat Systems only.

Click HERE for National Stock Number listing of MT-100 Tips & spares parts

   

PS-90 Universal Soldering Iron NSN 3439-01-496-8540

The PS-90 Universal Soldering Iron is ideal for most soldering applications and SMT repair operations where high thermal capacity and flexibility are required. The PS-90 features a rugged plug-in heater with gold contacts. There are 15 standard single point soldering tips and over 10 surface mount removal tips for the PS-90, many of which are available through national stock numbers. IntelliHeat and SensaTemp versions available.

Click HERE for extensive National Stock Number listing of PS-90 Tips and Spare Parts

   

 
TT-65 ThermoTweez SMT Removal Tweezer NSN 3439-01-393-3025

A versatile SMT removal tool, the TT-65 ThermoTweez provides safe, one-handed, rapid reflow and component removal of PLCCs and other 4 or 2 sided SMT components. Unlike other methods, its high thermal capacity and targeted heat delivery remove even the largest SMDs in just seconds without damaging the PCB or risking adjacent component reflow, even on heavy assemblies. The patented vertically oriented handpiece and a wide variety of quick-change, slim-line tips easily reach into the tightest spaces for fast, safe component removal. The TT-65 also features a patented “stroke” adjustment to reduce hand fatigue for repetitive operations. IntelliHeat and SensaTemp versions available.

Click HERE for National Stock Number listing of TT-65 tips & spare parts.

   

TJ-70 Mini-ThermoJet Hot Air/Convective Handpiece NSN 3439-01-399-4906

PACE's TJ-70 Mini ThermoJet provides safe, rapid installation or removal of chip components, SOT's, SOIC's, PLCC's, QFP's and other surface mounted devices via controlled convective/hot air. A finger-actuated air switch and SensaTemp Control provide safe, "instant use" capability without constant running of an air pump. The TJ-70's pencil grip design lets you target controlled heat right at the solder joints without affecting adjacent components solder or damaging the pc board. Also effective for conformal coating removal via convective softening of urethanes/over-curing of epoxies. Available in SensaTemp (NSN 3439-01-339-4906) and IntelliHeat configurations.

Click HERE for National Stock Number listing of TJ-70 tips & spare parts.

   

TP-65 ThermoPik with Vacuum Pick-Up for QFP/Flat Pack Removal NSN 3439-01-380-8913

The PACE TP-65 ThermoPik provides safe, rapid reflow and removal of a wide variety of QFPs and Flatpacks. Its high thermal efficiency design targets controlled heat right at the joints, away from sensitive components and substrate areas. The TP-65's self-adjusting, integral vacuum pick with finger switch actuator provides for easy, one handed operation. Available for SensaTemp Systems only.

 

TJ-85 ThermoJet Slim Line Convective/Hot Air Pencil for IntelliHeat & SensaTemp Systems

When the precise application of hot air is required, PACE's TJ-85 ThermoJet Slim-Line Hot Air Pencil is ideal for delivering convective heat for the installation and removal of chip components, SOTs, and SOICs, from large SMDs down to the smallest 0201s. The handpiece's slim line, pencil grip design maximizes operator comfort and control. Also useful for conformal coating removal via spot heating of coating which softens adhesives, urethanes and epoxies. Multiple quick-change nozzle sizes are available. The TJ-85's airflow is actuated with a foot pedal (provided) and provides safe, "instant use" capability without constant running of an air pump. Available for both IntelliHeat and SensaTemp powered systems.

Click HERE for National Stock Number listing of TJ-85 spare parts & tips.

 

TP-100 ThermoPik 100 with Vacuum Pick-Up for QFP/Flat Pack Removal

PACE's TP-100 ThermoPik is the newest tool for SMT component removal, designed to reflow and remove QFPs in seconds. The integrated vacuum pick-up lifts the component from the PCB upon reflow. Based on our unique MT-100 handpiece, there isn’t another SMT removal tool that is more comfortable in your hand. Over 10 styles of tips are available. Available for IntelliHeat Systems only.

 

New Redesigned Tip and Tool Stands
with Low Abrasive Dry Wipe Capability
TD-100 Instant-Setback Cubby
Maximizes Tip Life

A redesigned series of Tip & Tool Stands are now standard with all PACE Systems. Each Tip & Tool Stand allows for safe and secure holding of a particular Handpiece, hot tips, Tip Tool, Water Sponge, Cleaning Brush and can be mounted to the side of many PACE power sources. The unit incorporates a new, low abrasive dry wipe made of fine metal coil that won't drop tip temperature, cleans better than conventional sponges, won't damage your tips, and allows for removal of caked on/burned-on lead-free fluxes & oxides. The Sponge/Water Well is still included, but not really necessary! Each Tip & Tool Stand is constructed of heavy duty, corrosion resistant metal.

 


An optional INSTANT-SETBACK CUBBY is available for use with PACE IntelliHeat units. When connected, it automatically puts the system into SetBack Mode when the TD-100 Iron has been in the cubby for 45 seconds. SetBack Mode means that the temperature is set to just below solder melt temperature so the corrosive action of the leaded or Lead-Free solder is stopped, maximizing the life of your tips! The system returns to normal operation when the iron is removed from the cubby. 

Other Accessories for PRC 2000-2M
Pulse-Heat "Cordless" Handpieces Quick-Connect to Universal Power Cord Supplied with PRC 2000
LF-15 LapFlo/ThermoPart
Handpiece
NSN 3439-01-354-3448
CT-15 ConducTweez
Conductive Tweezer
NSN 3439-00-041-1985
TW-15 ResisTweez
Resistance Tweezer
NSN 3439-00-155-4597
TS-15 StripTweez
Thermal Wire Stripper
NSN 5130-01-247-4751
 

LapFlo uses quick connect, plug-in tips that allow for single point or multi-point soldering of flat packs, SOICs, QFPs and other extended lead devices. When used with the Thermal Parting Tip, it acts as a hot knife, overcuring epoxy conformal coatings for easy removal.

 

The CT-15 is a fast heat up conductive tweezer, that is excellent for desoldering and/or removing SMD chips and other 2-sided surface mount components from printed circuit cards. Tips heat up from cold start in seconds.

 

TW-15 allows for fast resistance heating for soldering or desoldering of closely spaced connector pins, terminals and lugs. You come in cold, grip the terminal, push on the foot switch to quickly reflow the connector pin or terminal, without contaminating the terminal with solder.

 

The TS-15 is a Thermal Wire Stripper that allows for temperature controlled, damage free removal of all wire insulation, including Teflon. Designed to quickly remove insulation without nicks or cuts, it allows stripping from #43 wire up to cables with over 1/2" diameter.

 
MC-65 MicroChine Miniature Machining System
NSN 3439-01-383-1037
PV-65 Pik-Vac Vacuum Handling Wand
NSN 4940-01-396-1874
 

PACE's MC-65 MicroChine (for PRC 2000 use only) is a lightweight, variable speed machining handpiece for precision circuitry and substrate repair. including milling, drilling, abrading, conformal coating removal, multilayer excavations, repair of plated-thru-holes, conductor repairs, even your kid's Pinewood Derby, if you are so inclined! With its tachometer feedback, the MicroChine can maintain controlled drilling and milling rates under varying loads. The MicroChine's patented probe brake feature instantly stops machining at a selected layer depth for safe multi-layer repair. MicroChine comes with a Deluxe Tool Kit with an assortment of 3/32" shank drills, ball mills, mandrels, brushes, abrasive wheels, bullet wheel abrasives, each mounted on 2 compact stands.

The pencil-like PV-65 Pik-Vac allows you to safely handle small, delicate parts without marring or mechanical damage. Provided with 3 interchangeable tips.

Paste Dispenser Kit

A kit is provided that attaches to the PRC-2000's self contained high pressure air supply with timing control, for precise dispensing of solder paste, liquid flux, gel/paste flux, adhesives & other materials. Syringes not included.

Download Brochures, Flyers, Catalogs, Data Sheets and other PACE Info
Click on Image to Download Files


PACE Soldering, Desoldering &
Rework Catalog - 4 mb pdf


PACE Fume Extraction/Fume
Extractor Catalog  - 1.5 mb pdf


PACE BGA/Area Array & SMT
Rework Catalog - 2 mb pdf


PACE Spare Parts and Consumables Catalog  - 1.7 mb pdf


Diamond Tip Heater Cartridges for
TD-100 Flyer - 1.2 mb pdf


PACE Tip Temperature Monitor
Flyer  - 90 kb pdf

 
PM-200 Process Monitor
Flyer - 94  kb pdf


New IR 1000 BGA/SMT Rework & Repair Station Flyer  - 580 kb pdf


SX-90 and SX-80 Desoldering Tip
Listing/Chart - 30 kb pdf


SX-90 and SX-80 Handpiece
Spare Parts
Listing - 65 kb pdf


SX-70 Handpiece
Spare Parts Listing - 120 kb pdf


TD-100 Tip Heater Cartridges
and Spare Parts Listing-152 kb pdf


PRC 2000 Spare Parts
Listing  - 40 kb pdf


TT-65 ThermoTweez Tip
Listing  - 60 kb pdf


PACE Solder Fume Extraction Systems
PowerPoint Presentation - 3.5 mb ppt


 


home | about us | product lines | contact us
PACE Inc | Air-Vac | ChemFree | Crystal Mark | Glenbrook Technologies | Pro-Line | Vision Engineering